Recommended Sites

Creative Guest: Budget Beautiful DIY

 

budget beautiful DIY

Hello! My name is Alicia and I have the blog Budget Beautiful DIY.

tutorial photo bandwhit

Four years ago, I left a career as a hairstylist in a gorgeous salon to stay home with my two munchkins. Going from two incomes to just one has brought out my creative side not only with finances, but also with fun handmade projects. Between changing diapers, attempts at cooking, and reading books to my kids, I whip up little crafts to bring a touch beauty to our lives.

tutorial image final (1)

Supplies List:
-fabric
-needle and thread
-headband (I used one covered in fabric from Target)
-hot glue gun
-button, vintage earring, or rhinestones

Make sure all your strips are cut on the bias (on the "bias" means to cut your fabric on an angle so the threads in the fabric are running on the diagonal). This way you don't have strings shedding off your headband.

photo 1

Cut one strip of fabric 2" X 9"
Cut two strips of fabric 1 1/2"  X 9"
Cut two more strips as long as you can make them 1" wide to wrap your headband with.

photo 2

Step One: Take the widest strip and fold in half lengthwise about 3/4 of the way as in the picture.

photo 3
Step Two: Sew along the long folded edge and pull the stitching to gather it.
photo 4

Step Three: Sew the short ends together so you have a ring.

photo 5

Step Four: Squash the circle a little to make an oval and sew the middle together on the backside so it stays an oval shape.

photo 6

Step Five: Repeat steps 1-4 on the 1 1/2 " strips.
Now you should have three ovals that look like this.

photo 7

Step Six: Fray the edges of the ovals by pulling on the fabric with your fingers.

photo 8

Step Seven: Fray one side of your long 1" strips. Then simply wrap your headband in the strips of fabric pulling the fabric a little so it forms to the arch of the band. Wrap at a slight angle and overlap just a little. I put a dab of hot glue on the underside of the headband with each wrap of fabric.

photo 9


If you need both strips to completely cover the headband, place your "seam" on the top  where you'll be gluing your rosettes.

photo 10


This is what you headband should look like completely wrapped.

photo 11


Step Eight: Hot glue the ovals onto your headband placing them a little to the side. The largest oval should slightly overlap the smaller ones. If you'd like, add a button, rhinestones, or a vintage earring like I did.

You’re finished!

photo12

 Budget Beautiful DIY

0 comments:

Post a Comment